Warthog WH-1/2 & WH-3/4

Sewer cleaning nozzle for lines 6"-18"
(150-450 mm) with elbows

The Warthog WH-1/2 and Warthog WH-3/4 are the same tool but offered with different inlet port sizes to match either 1⁄2” or 3⁄4” NPT. The Warthog WH models are best for 6”-18” lines. 

These tools are most commonly used with small capacity combination trucks and large trailer jetters.

Warthog WH-1/2 & WH-3/4 ideal for

  • Smaller municipal lines
  • Larger residential lines
  • Removing grease
  • Cutting roots
  • Clearing ice
  • Removing soil blockages

Warthog WH-1/2 & WH-3/4 features

  • High speed rotation
  • 2 Different inlet port sizes
  • Replaceable AP2 nozzles

WH-1/2 WH-3/4
Inlet connection 1/2" NPT or 1/2" BSP 3/4" NPT or 3/4" BSP
Max. working pressure 550 bar 550 bar
Max. flow 170 l/min 170 l/min
Pulling force 80-220 N 80-220 N
Tool diameter  86 mm 86 mm
Length 191 mm 191 mm 
Nozzle ports  3x 1/8" NPT 3x 1/8" NPT
Weight  2,1 kg 2,1 kg

Head selection

There are four heads available, one for flow rates of 45 to 75 l/min (R8), one for 65 to 95 l/min (R6), one for 75 to 115 l/min (R45) and one for 115 to 170 l/min (R3) . Jet thrust powers rotation and also pulls the tool through the line. The front jet is useful for getting thru blocked pipes. However, using the front jet fights against the pulling power of the rear jets, so plugging the front jet may be necessary to allow the tool to pull itself further down the line.

Descaling head WH 040-DS

The Warthog WH-1/2 & WH-3/4 can easily be converted into a powerful descaling tool by simply changing the head. The descaling pattern features two additional jets at 105˚ combined with a plugged front port to ensure maximum power. The result is enhanced removal of scale, tuberculation, corrosion products, soap and minerals.

Like to know more about the Wartog WH-1/2 & WH-3/4?

Contact DERC Salotech +31 (0)186 62 14 84.

WS 040-DS

Descaling Head
WH 040-DS



Related products

WGR Magnum-1

Warthog WGR Magnum